Conveyor Belting
PT Products
Rubber Snowplow Blades


      Long Lasting. Smith Industrial’s rubber snowplow edges are made of a tough, resilient rubber compound that shows very little wear after many hours of use. They can outlast steel edges many times.

      No Gouging. Rubber edges easily adjust to irregular road surfaces & pavement markers-without gouging.

      Fast, Clean, Quiet Snow Removal. Smith’s rubber edges have a “squeegee action” to clean faster, better & much quieter than steel cutting edges.

      Lower Maintenance Costs. Since Smith Industrial’s rubber snowplow edges need fewer replacements than steel edges, fewer man hours & less down time means lower costs.  Rubber edges also absorb damaging shock that would be transmitted to the plow, truck, and driver with a steel edge.  



Sizes:  The edges can be ordered to any length desired. Smith can supply a single edge or bulk lengths up to 50 feet long.  Standard sizes are 1½” thick X 8”,10” or 12" wide and 1" thick x 6", 8" or 10" wide. Other sizes are also available.  

Bolt Holes:  Smith Industrial can custom punch to any hole pattern desired. Our standard hole is a 1” X 3½” oval slot, allowing for easy alignment and installation. Custom hole sizes are also available, upon request.  

Adjustment:  We recommend rubber snowplow edge adjustment be based on the type equipment being used. Front-mounted plows that ride on casters or shoes perform best with a 2” overhang and 1” overhangs are suggested for snow pushes and unsupported front-mounted or underbody mounted plows and graders.  

If you want to cut the cost of snow removal, specify Smith Industrial’s rubber snowplow cutting edges.  They are the best solution wherever steel blades cause damage or create a safety hazard.  

Rubber Snowplow Link

(Click on the company logo to go to their site)




Phone: (815) 874-5364 | Fax: (815) 874-5390 | Email: sales@smithindustrial.com
  Home | Hoses | Conveyor Belts | PT Products | Filters/Dryers | Plastics | Rubber Snowplow Blades | Line Card | Contact