Rubber Snowplow Edges


Long Lasting

Smith Industrial’s rubber snowplow edges are made of a tough, resilient rubber compound that shows very little wear after many hours of use. They can outlast steel edges many times.

No Gouging

Rubber edges easily adjust to irregular road surfaces & pavement markers-without gouging.

Fast, Clean, Quiet Snow Removal

Smith’s rubber edges have a “squeegee action” to clean faster, better & much quieter than steel cutting edges.

Lower Maintenance Costs

Since Smith Industrial’s rubber snowplow edges need fewer replacements than steel edges, fewer man hours & less down time means lower costs.  Rubber edges also absorb damaging shock that would be transmitted to the plow, truck, and driver with a steel edge.



Sizes: The edges can be ordered to any length desired. Smith can supply a single edge or bulk lengths up to 100 feet long. Standard sizes are 1½” thick X 8”,10” or 12″ wide and 1″ thick x 6″, 8″ or 10″ wide. Other sizes are also available.

Bolt Holes: Smith Industrial can custom punch to any hole pattern desired. Our standard hole is a 1” X 3½” oval slot, allowing for easy alignment and installation. Custom hole sizes are also available, upon request.

Adjustment: We recommend rubber snowplow edge adjustment be based on the type equipment being used. Front-mounted plows that ride on casters or shoes perform best with a 2” overhang and 1” overhangs are suggested for snow pushers and unsupported front-mounted or under-body mounted plows and graders.

If you want to cut the cost of snow removal, specify Smith Industrial’s rubber snowplow cutting edges. They are the best solution wherever steel blades cause damage or create a safety hazard.



SIMA logo


Contact Us